in terms of its bearing capacity: the freezer drawer is fully contact with embossed aluminum plate evaporator, refrigeration area is large, uniform cooling, due to the force uniform, embossed aluminum plate evaporator of the bearing capacity of up to 30 kilos.
The surface of extruded aluminum products has rough vertical or horizontal grooves and scratches. The scratches that are recessed from the surface are mostly caused by the adhesion of the mold or rough machining at the blank knife. Another is raised the scratch appeared on the corner of the products, is generated due to the extrusion die crack. Transverse cut or scratch is mainly due to the finished products from sliding on lateral to cooling bed on the hard thing to highlight when sawing machine will product scratches, also have a plenty of in the loading, handling. Scratches and scratches are common surface defects in aluminum extrusion process.
Aluminum coils are the most commonly used series in the conventional industry, with the 1000 series in all series being the one with the highest aluminum content. Aluminum purity can reach more than 99.00%. Because it does not contain other technical elements, so the aluminum coil production process is relatively simple, the aluminium coil price is relatively cheaper.
How to identify the quality of aluminum alloy plate
Is there an easy (cheap) way to identify aluminium alloys
Usually judge alloy aluminum plate quality time must pay attention to the appearance of brightness, survey bat bao hou is even even, pinch the board with the hand, feeling the elasticity and patience isn’t is good. Its main function is to make the moisture in the hot air on the heat exchange sheet coagulate into water droplets easily spread and flow down the sheet.
During the extrusion process of aluminum plate, there will be surface peeling or bubble appearing in a large capacity. What is the reason? What should be done to eliminate it? Now by the aluminum plate manufacturer for your troubleshooting!
6061 aluminum plate has high strength, corrosion resistance, oxidation resistance, good effect, is widely used in automated machinery parts, precision machining, automobile chassis, cake mold, etc., was liked by the majority of users, but 6061 T6 aluminum plate, F, O what is the difference between the three kinds of states, as the car chassis and cake mold what are the advantages? Now henan aluminum plate manufacturers for you to explain it in detail!
As we had talked before, aluminum slugs has wide application on automotive, gas cylinders, aerosol cans, tubes, industrial packaging, electronics and other aspects. As we all know that aluminum alloy has 8 series, when it comes to 3000 series, the typical alloy is 3005, the same as aluminum alloy, 3005 aluminum slugs is the typical product of 3000 series aluminum slugs. 3005 aluminum slugs has the same physical characteristics and chemical characteristics with 3005 aluminum alloy.
With the increasing maturity and the rapid development of CTP technology, as well as the declining of price, CTP technology has been more and more welcomed by the majority of printing practitioners, usage of CTP plates have the potential trend to catch up with the traditional PS plate. The overall requirements of the printing plate is very high, especially the current CTP plate is mostly used for high-grade color printing plate, to ensure the quality of the aluminium plate, the plate based apparent quality is the premise
There are many aluminum coil series manufactured by the Haomei, and 2a14 aluminum coil is one series of it, in…
At present, the demand in the market for color coated aluminum coil is very large, many manufacturers have seen this opportunity, so they have invested in the production of color coated aluminum coil, which can not forbidden some manufacturers who do not supply qualified products, then how do we identify the merits of color coated aluminum coil?