Aluminum alloy material is the best material for the production of liquefied natural gas storage tank, not only it has ultra low temperature structural material, but also because of its easy processing forming, and has good weldability, recovery rate of up to 95%.
5083 aluminum plate is one of the most common alloy products of Marine aluminum field. Planking of other products such as 5052, 5383, 8784, 5454, such as alloy, were also the representative of 5 series Marine aluminum products, among them, 5083 Marine planking alloy aluminum plate is the most widely used. Planking aluminum alloy compared with general aluminium alloy products, it will be more strict inspection, when in the market for the purpose of ship, also want to be approved by the relevant national certification authority. So just what certification standard does5083 Marine aluminum plates have?
With the development of the logistics and transportation industry, the demand for large trucks on the market is increasing day by day. Truck body is generally made of aluminum alloy sheet. A few years ago, a lot of truck manufacturing using steel plate, but after a period of time, found that the steel plate is easy to rust corrosion, greatly shorten the service life of the truck. At present, the market is gradually replaced by aluminum sheet. Aluminum alloy sheet has good oxidation resistance, corrosion resistance and excellent antirust properties. In addition, the quality of the aluminum alloy sheet is lighter than that of the steel plate, because it is a good choice to use the body of the car.
Mirror aluminum refrigerator copper aluminum tube welding video 5083 aluminum pipe fittings veneer with mirror effect is popular, is widely used in lighting lamps and lanterns reflective panels and decorative lamps and lanterns, solar reflective materials, interior decoration, integration ceiling, wall decoration, household electrical appliance panels, electronic products shell, kitchen furniture, car inside and outside decoration, signs, logo, cases, bags, jewelry box, etc. Here today to share making a polished mirror aluminum sheet process.
The selection of ship sheet materials is more stringent. At present, most of the aluminum alloy products such as 5083, 5086, 5454 and 5754 are used. In
5083 aluminum sheet belong to Al-Mg-Si alloy, the use of a wide range of. The application of 5083 aluminum sheet belongs to the high-end field of aluminum processing industry
5083 Aluminum Alloy belong to 5 mg Al alloy, has high light, good plasticity, corrosion resistance and processing, excellent comprehensive properties. 5083 Aluminum Alloy is mainly used for processing die, ship, deck, fuel storage tanks and other products, with the development of science and technology research and promotion, its performance is more excellent, but also grow with market demand.
As we know, the gas storage cylinder is a gas storage device in the automobile brake system, it is used to store the compressed gas of the air compressor, which is used for automobile braking, whistle and other systems. The cylinder comprises a cylinder and two end caps, wherein a water discharge connection is arranged on the cylinder body and a pipe joint is arranged on both ends.Existing technology in the automobile gas reservoir including aluminium magnesium alloy iron of the gas reservoir and gas reservoir, the aluminum surface has the effect of magnesium alloy materials, cleanliness, and naturally formed a layer of dense 3 oxidation 2 aluminium surface protective film can well protect the substrate from corrosion, prolong the service life and without spray paint, also has a lightweight aluminum and magnesium alloy materials, reduce the body weight.In view of the above advantages, most of the existing technologies are aluminum magnesium alloy storage cylinders.
5083 aluminum sheet is a metalloid, it can soluble in alkali, also soluble in acid.
Zinc does not change much in dry air, but in humid air, zinc surface will produces a film of zinc carbonate hydroxide. The standard electrode potential of zinc is -0.76V, as for steel, the zinc clad layer is a kind of anodic clad layer, its main purpose is to prevent the steel from corrosion, and the thickness of the zinc clad layer has a great relationship with the protective properties of 5083 aluminum sheet.
5083 aluminum alloy is a high magnesium alloy, not good strength in heat treatment alloys, corrosion resistance, good machinability. Anodized surface appearance. Arc welding performance. 5083 alloy main elements as magnesium, has good corrosion resistance and weldability, and medium intensity. Excellent corrosion-resistant properties of 5083 alloy widely used for marine applications such as ships, automobiles, aircraft welding, Metro light rail, strict fire-resistant pressure vessels (such as liquid tankers, refrigerated trucks, refrigerated containers), refrigeration equipment, Tower, drilling equipment, transportation equipment, such as missile parts, armored.