What are the typical applications of a 5754 aluminum plate?

Alloy 5754 is a typical aluminium-magnesium alloy which is closely related to the alloys 5454 and has higher strength than 5251. The most common tempers for 5754 aluminium are shown as O, H22, H24, H26, H32, H111 and etc. This alloy has excellent corrosion resistance especially to seawater and industrially polluted atmospheres. In particular, mechanical property requirements vary widely with temper, product and product dimensions. haomei aluminium specializes in 5754 aluminum plate and sheet since 1997 so that has a wide range of sizes available to fully satisfy customer’s requirement. We offers Alloy 5754 which corresponds to ASTM B 209, EN 485-2, EN 573-3, EN 754-2 standard designations and specifications but may not be a direct equivalen

Continue Reading →

What are the properties of 6063 aluminum plate?

6063 aluminum alloy plate are widely used in building aluminum doors and windows and curtain wall framework, in order to ensure that the doors and windows, curtain walls with high wind resistance performance, assembly performance, corrosion resistance and decorative properties, requirements for the comprehensive performance of aluminum alloy profile is much higher than the industry standard sections.

Continue Reading →

The difference between aviation aluminum plate and ordinary aluminum plate

Aviation aluminum plate is an ultra-high-strength deformed aluminum alloy with good mechanical properties and processing properties, easy to shape, good heat treatment strengthening effect, high strength at high temperature (150 ° C or higher), and good toughness.

Continue Reading →

What alloy numbers does mold aluminum plate use?

alloy numbers of mold aluminum plate for your reference.
Mold aluminum sheets are generally high strength heat treatable alloys that require good mechanical properties, workability, and ease of processing. According to the use and characteristics of the mold, the aluminum plate also needs to have corrosion resistance and resistance to mold oxidation.

Continue Reading →

Tank car aluminum plate use some aluminum alloy

Market commonly used tank car aluminum plate length of 12.5 meters, width is less than 2.2 meters, the thickness is usually 5, 6, 7, 8 mm, a full tank car tanks, general need 4 to 6 pieces of aluminum plate welding and become, one of the most important body adopts 5083 h111 aluminum plate, on both sides of the pot cover is 5083 – O aluminum plate, O state more softer, which can cover need to bend, clapboard part adopts is 5083 – O state. In addition, some manufacturers use 5454H111 aluminum plate to produce tanks.
Aluminum plates for tank cars are mainly 5 series and 6 series related products. The 5 series are aluminum alloys with magnesium as the main alloy element, and the 6 series are aluminum alloys with magnesium and silicon as the main alloy elements and Mg 2Si phase as the strengthening phase. The main alloy brands include: 5052 aluminum plate, 5083 aluminum plate, 5754 aluminum plate, 6061 aluminum plate and 6082 aluminum plate.

Continue Reading →

What is the material of tread plate aluminum?

aluminum tread plate is a very common material that we can see it almost everywhere. As a new type of skid-proof material, it has been recognized and trusted by the vast number of industries and customers. The reason why the aluminum tread plate is recognized by people is inseparable with its own advantages.

Continue Reading →

What is the quality of a 6061 aluminum sheet plate?

Whether our common seen aluminum alloy shutter door, or can, we use a lot of aluminum as raw materials. Although to average person, aluminium alloy does not have too big distinction, but if you study carefully, you can discover because of the difference of composition and making craft, aluminium alloy is very different actually.

Continue Reading →

How do I measure the flatness of 6061 T651 Aluminum Plate?

The method that is use in most cases is 2 foot short span. I will make the assumption that the 6061T651 Aluminum plate has been purchased to “Type 200® wrought tooling plate or Precision Plate®” specification. If not, standard Aluminum Association tolerance of .100” for thickness of 0.250”–0.624” and .075” for thickness of 0.625”-8.000” would apply (Table 7.18*). A certified 24” straight edge is used in conjunction with certified taper gage or feeler gages and a relatively flat inspection surface.

Continue Reading →

What problems caused by improper cleaning of aluminum strip

Aluminum strip cleaning is best to use neutral liquid, which does not corrode the surface of the aluminum strip, and will be dried after cleaning to avoid oxidation of the aluminum strip. If the user uses the wrong cleaning method, it will cause damage to the aluminum strip.

Continue Reading →