Aluminum Sheets- The Ideal Material for Production of Bottle Closures

 

Aluminium sheets is used for the bottle cap market. Using a unique rolling technology, Haomei supplies aluminium sheets ideally suited to manufacture the caps for long neck wine bottles, extremely deep drawn and decorated closures, plus a range of pilfer proof caps for beverage bottles, soft drink, juice, isotonic beverage, energy beverage, and other products, such as the 30×60 mm specifications are often used in the wine and spirits segment.

  • is light weight
  • is easily and economically recycled
  • has superior barrier qualities
  • has good formability
  • offers a bright finish for decoration.
Aluminium sheets is used for the bottle cap market
Aluminium sheets is used for the bottle cap market
Alloy Temper Thickness Width Length Coil Strip Earing Diagonal
8011,
3105
H14, H16,  H24, H26 0.15~0.25 mm
(+/-0.005mm)
500~1000 mm
(+0.5mm, -0mm)
500~1000 mm
(+0.5mm, -0mm)
500~1000 mm 20~500 mm 1 ≤ 1mm
Alloy Fe Si Cu Mn Mg Cr Zn Ni Ti Other Al
Each Total
8011 0.60~1.0 0.50~0.9 0.1 0.2 0.05 0.05 0.1 0.08 0.05 0.15 Remain
3105 0.7 0.6 0.3 0.3~0.8 0.2~0.8 0.2 0.4 0.1 0.05 0.15 Remains
Alloy
Temper
Thickness (mm)
U.T.S (Mpa)
Elongation (%)
8011
H14
0.15~0.25
185~205
≧2
Alloy Temper Thickness (mm) U.T.S (Mpa) Elongation (%)
8011 H14 0.15~0.25 125~155 ≧2
3105 H14 0.15~0.25 150~200 ≧1

Haomei Aluminium Sheets are suitable for both transparent and non-transparent lacquering, and will not bend during curing process. For applications requiring deep drawing, such as long caps, Haomei aluminium sheets show very low earing, greatly reducing scrap rate for our clients.
Haomei Aluminum sheets is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Its strength, high formability, low earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.