Reactor is a kind of electromagnetic device which uses electromagnetic induction principle to transfer energy and information in the electric appliance. Its material consists of four kinds: 1. magnetic material 2. conductive material 3. insulating material 4. structural material.
As a aluminum strip manufacturer, Haomei Aluminum found that water the main culprit of corrosion of coated aluminium strip during storage and transportation, whether annealing state or hard state, as long as water or affected with damp, any kind of packaging way will suffer corrosion. The water corrosion has a characteristic, namely in the surface of aluminium strip, there is a white watermark corrosion boundaries, area under the influence of water with large area of corrosion state and no obvious directivity. There is no obvious watermark corrosion boundary in the complex form of damp corrosion.
Aluminum strip cleaning is best to use neutral liquid, which does not corrode the surface of the aluminum strip, and will be dried after cleaning to avoid oxidation of the aluminum strip. If the user uses the wrong cleaning method, it will cause damage to the aluminum strip.
Compared to similar products, Haomei supply aluminum strip with round edge and without burr have small thickness tolerances and high width accuracy. Strictly inspect the surface quality and the burrs on the edges of the aluminum strips to ensure product quality better.
As we know aluminum cap closure are used more and more widely. How to select good aluminum cap closure stock is an important questions for many customers. Today with our much experience which working with closure manufacturers, we talk about how to select good aluminum cap closure stock?
Aluminum strips for lamp base is also called aluminum strips for lamp heads or aluminum strip for lamp cap. It is aluminum tape shape product. The aluminum lamp base need to be punched and then tapped into spiral shape, the material is thin and needs to withstand a certain pressure, so the aluminum lamp base material needs to have high mechanical strength, uniform micro structure and deep drawing properties. Thus 1000 series aluminum and 3000 series aluminum can be the suitable material, the width of lamp base is always thinner, so the material for making lamp base is aluminum strips.
The processing machine for the aluminum strip is the slitting units, which can cut the strip into proper length and width according to the demand, the copper strip can be also processed through it, but the original material of the electronic products no longer rely on the copper belt, and the electrical conductivity of the aluminum ranks only after the copper, so the aluminum strip has been a trend in international country
cording to the development of the aluminum foil, the aluminum foil manufacturing process mainly has the following three methods: Lap rolling method, strip rolling method and deposition.
Are you looking for precisioor strip? We can meet your tight tolerances and deliver flat-rolled aluminum coil or strip to your specifications. Contact us today.
Coated aluminum sheet is widely used for manufacturing and processing daily hardware utensils, low-tension corrosion-resisting containers, household appliances, architecture decoration, billboard and street nameplate.